Abstract:
The paper presents the basic theory and corresponding equations for calculation of the static influences of the structures with semi-rigid connections in joints. The static design of system in which connections of members are absolutely rigid or perfectly pinned has been thoroughly worked out in the existing literature. In real structures in general, and particularly in the precast ones, connection in joints may be partially rigid, which can have a significant impact on the change of stresses and strains in the structure. In the world there are several procedures, with different approaches, to the structural design with semi-rigid connections, however, it is proved that they all lead to the same results. All of these approaches in addition to theoretical deal with experimental analysis of results. According to the approach that will be presented in this paper, typical prefabricated structures "Minoma" 1, "Minoma" 2, and "Minoma" 3 with span of 12m, 20m and 27m respectively, and the height of the column up to 9m, have been experimentally analyzed. A numerical example will be given and discussed, where bending moments due to a given load, as well as due to input force in the tensioner, have been calculated for defined levels of rigidity of connection using the deformation method. The obtained superimposed bending moment diagram will be analyzed too.